- Hardware Manuals
- Commissioning and Tuning Guide
- Software Reference
- Resources
Attention
The single-ended analog input has an extended range of 104.7% (e.g. 0xFFF correspond to +5.235V).
The differential analog input has an extended range of 121.8% (e.g. 0xFFF correspond to Vdiff = +6.09V).
Symbol |
Min. |
typical |
Max. |
Description |
Impact |
---|---|---|---|---|---|
V diff |
-5V |
+5V |
The input voltage between the positive and negative input pins. |
Any voltage out of this range causes saturation to the min/max ADC value. |
|
V cm |
-1V |
+2.5V |
+5V |
The common mode voltage. |
Any voltage out of this range causes saturation and inaccuracy in the measurements. |
V in,P |
-15V |
+15V |
The tolerable voltage between the positive input pin and GND. |
Any voltage out of this range damages the analog input’s circuitry. |
|
V in,N |
-15V |
+15V |
The tolerable voltage between the negative input pin and GND. |
Any voltage out of this range damages the analog input’s circuitry. |
|
R i |
13.6kΩ |
Internal input resistance |
|||
Error |
-1% |
+1% |
The input voltage between the positive and negative input pins. |
Note
Symbol |
Min. |
typical |
Max. |
Description |
Impact |
---|---|---|---|---|---|
V in |
0V |
+5V |
The input voltage between the input and GND. |
Any voltage out of this range causes saturation to min/max ADC value. |
|
V in,lim |
-0.5V |
+6V |
The tolerable input voltage between the input and GND. |
Any voltage out of this range damages the analog input’s circuitry. |
|
R i |
100kΩ |
Internal input resistance |
|||
Error |
-1% |
+1% |
Error in ticks |