0x220A SSI Encoder 2

Configuration parameters for second SSI encoder.

Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Type	0x220A:1	USINT	8	HALL 1 Incremental 2 BISS 4 REM 14 5 REM 16MT 6 SSI 7				readwrite
For internal purposes only!
Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Function	0x220A:2	USINT	8	Disabled 0 Commutation & Motion Control Feedback 1 Commutation & Monitoring (#0x230A, #0x230B) 2 Motion Control Feedback only 3 Monitoring only (#0x230A, #0x230B) 4 Commutation only 5				readwrite
Determines encoder function/purpose. The encoder can be configured for commutation, motion control feedback and monitoring. In monitoring mode, the position and velocity information will be displayed in objects #0x230A & #0x230B.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Resolution	0x220A:3	UDINT	32	1		1	Inc/Revolution	readwrite
Number of pulses in one revolution.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Zero velocity threshold	0x220A:4	UDINT	32	0		5000	μs	readwrite
Time threshold to set the velocity to 0 if no new position was received from the encoder.
Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Polarity	0x220A:5	BOOL	1	Normal Polarity 0 Inverted Polarity 1				readwrite
Direction of the encoder position in respect to the motor.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Clock frequency	0x220A:6	UINT	16	1		1250	kHz	readwrite
Frequency for the SSI clock line.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Frame size	0x220A:7	USINT	8	1		1		readwrite
Size of the SSI frame in bits.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Singleturn bits	0x220A:8	USINT	8	1		1		readwrite
Number of singleturn bits to read from the sensor.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Singleturn first bit position	0x220A:9	USINT	8			0		readwrite
Position of the first bit of singleturn position on the SSI frame. Position 0 of the frame corresponds to the first bit transmitted.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Multiturn bits	0x220A:10	USINT	8			0		readwrite
Number of multiturn bits to read from the sensor.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Multiturn first bit position	0x220A:11	USINT	8			0		readwrite
Position of the first bit of multiturn position on the SSI frame. Position 0 of the frame corresponds to the first bit transmitted. Usually this value is 0, since multiturn is the first element on the frame. Only relevant if Multiturn bits is bigger than 0.
Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Parity type	0x220A:12	USINT	8	No parity 0 Odd parity 1 Even parity 2				readwrite
Type of parity read from the sensor. If there is parity, it should be the last bit on the SSI frame.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
First clock delay	0x220A:13	UINT	16			0	μs	readwrite
Delay after first clock edge. This is compatible only with some encoders (will be specified in the encoder datasheet).
Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Data ordering	0x220A:14	BOOL	1	Natural Binary Code 0 Reflected Binary Code 1				readwrite
Select if the ordering of position is done using Natural Binary Code or Reflected Binary Code (also known as Gray code).
Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Endianness	0x220A:15	BOOL	1	MSB first 0 LSB first 1				readwrite
Order of the bits (Most Significant Bit or Least Significant Bit transmitted first). Usually MSB is transmitted first.