Installation Guide

This manual will guide you through the basic steps to get your SOMANET Circulo running.

Attention

When dealing with electronic devices, always consider these handling instructions!

Important

For proper functionality of the current sensors the servo drive must not be exposed to external magnetic fields.

• Wiring instructions

  • Power supply and motor brake

  • Encoders and IO

  • Temperature sensor

  • Mating parts and encoder battery

• Dimensions and mechanical mounting

• Mounting encoder rings

• Encoder accuracy

After you have successfully set up your servo drive you can proceed to commission and tune your drive:

Commissioning and tuning with OBLAC Drives