Mounting instructions

Heat dissipation

For correct functioning, the srvo drive must be installed on a sufficiantly dimensioned heat conducting surface made of a suitable material, such as aluminum.

Ensure that the servo drive is screwed properly to the heat conducting surface to facilitate the heat transfer.

Dimensions

Interference with magnetic fields

Please consider the placement of the servo drive carefully when designing the motion control application. It has become evident that the motor’s magnetic field has an impact on the drive’s performance.

These are the preferred arrangements:

1. At any position but shielded with a Faraday’s cage

2. Behind the motor

3. Beside the motor but shielded from the motor’s magnetic field with a plate