0x2205 Incremental Encoder 1

Configuration parameter for first incremental encoder

Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Type	0x2205:1	USINT	8	HALL 1 Incremental 2 BISS 4 REM 14 5 REM 16MT 6				readwrite
For internal purposes only!
Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Function	0x2205:2	USINT	8	Disabled 0 Commutation & Motion Control Feedback 1 Commutation & Monitoring (#0x230A, #0x230B) 2 Motion Control Feedback only 3 Monitoring only (#0x230A, #0x230B) 4 Commutation only 5				readwrite
Determines encoder function/purpose. The encoder can be configured for commutation, motion control feedback and monitoring. In monitoring mode, the position and velocity information will be displayed in objects #0x230A & #0x230B.
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Resolution	0x2205:3	UDINT	32	1		1	Inc/Revolution	readwrite
Total number of quadrature counts. Resolution = Lines per Revolution * 4 Note: Pulses = Lines = Cycles Positions = Counts = Increments = 4 * Pulses
Name	Index:Sub	Type	Bit Size	Min Data	Max Data	Default Data	Unit	Access	PDO Mapping
Velocity calculation period	0x2205:4	UINT	16	66		1000	μs	readwrite
The time period between two position samples. This value is used to calculate the velocity.
Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Polarity	0x2205:5	USINT	8	Normal Polarity 0 Inverted Polarity 1				readwrite
Altering the default values is recommended for expert users only!
Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Number of channels	0x2205:6	USINT	8	2-channel (no index) 2 3-channel (with index) 3				readwrite
Can be set as two-channels (without index) or three-channels (with index)
Name	Index:Sub	Type	Bit Size	Options			Unit	Access	PDO Mapping
Access signal type	0x2205:7	USINT	8	Differential RS422 0 Single-ended TTL 1				readwrite
Differential (RS422) or Single-ended (TTL).